RPi Model A+ Case Base - Red

RPi Model A+ Case Base - Red

Full Size Proto Kit for RPi

Full Size Proto Kit for RPi

USB to TTL (3.3V) Serial Cable for RPi

139,00 kr 111,20 kr
I lager
Fåtal i lager: 10 st
SKU
ADA-0954
  • Köp 10 för 113,05 kr 90,44 kr st och spara 19%
The cable is easiest way ever to connect to your microcontroller/Raspberry Pi/WiFi router serial console port. Inside the big USB plug is a USB<->Serial conversion chip and at the end of the 36" cable are four wire - red power, black ground, white RX into USB port, and green TX out of the USB port. The power pin provides the 5V @ 500mA direct from the USB port and the RX/TX pins are 3.3V level for interfacing with the most common 3.3V logic level chipsets.

Because of the separated pin plugs, this cable is ideal for powering and connecting up to the debug/login console on the Raspberry Pi or BeagleBone Black. Connect the pins as shown to power the Pi or BBB and establish the RX/TX link. Then install the Windows XP/Vista/7 or MacOS X PL2303HX drivers on your computer and connect with a terminal program at 115200 baud. Windows 8 & 10 is now supported! If you're using Windows 7 and you have issues, try this Prolific driver version 1.013. And if you're using an older version of Mac OS X (10.8-10.6) then try this Prolific driver version 1.5.1.

Also handy for hacking WiFi routers to install alternate OS's, or nearly any other 3.3V logic serial port. This is easier to use than an FTDI cable in many cases because the wires are separated. Note that we call this a "TTL cable" (since that's what they're called) but technically it's CMOS logic.

This cable is not good for Arduino re-programming such as a Boarduino, MENTA, Monochron, etc. because it does not have the DTR/RTS wire necessary for initiating the bootloader reboot sequence. For that we suggest an FTDI cable or FTDI friend.

There are four wires: red power, black ground, white RX into USB port, and green TX out of the USB port. The power pin provides the 5V @ 500mA direct from the USB port and the RX/TX pins are 3.3V level for interfacing with the most common 3.3V logic level chipsets.
Mer information
Artikelnr ADA-0954
Annan benämning N/A
Infolänkar Drivrutiner Windows
Drivrutiner MacOS
PDF Datablad (PL2303TA)
Short Description N/A
Skriv din egen recension
Du recenserar:USB to TTL (3.3V) Serial Cable for RPi
Fler produkter du kan vara intresserad av