ProtoShield Kit for Arduino

ProtoShield Kit for Arduino

Dual MAX14870 Motor Driver Shield

149,00 kr 119,20 kr
I lager
Fåtal i lager: 4 st
SKU
POL-2519
  • Köp 5 för 141,55 kr 113,24 kr st och spara 5%
  • Köp 10 för 134,10 kr 107,28 kr st och spara 10%

This small shield is an easy, economical way to control two small brushed DC motors with an Arduino or Arduino-compatible board. Its two integrated MAX14870 motor drivers allows it to operate from 4.5 V to 36 V, making it a great for higher-voltage motors and applications, and the shield can 1.7 A continuous (2.5 A peak) per motor. The shield can optionally be configured to power the Arduino from the same power supply as the motor driver, and the Arduino pin mappings can be customized (by cutting traces) if the defaults are not convenient.

This motor driver shield and its corresponding Arduino library make it easy to control a pair of bidirectional, brushed DC motors with an Arduino or compatible board, such as the A-Star 32U4 Prime. The board features a pair of Maxim’s MAX14870 H-bridge motor driver ICs, which allows it to operate from 4.5 V to 36 V and makes it well suited for driving higher-voltage motors like our 12V 20D gearmotors. The shield can deliver 1.7 A continuous per channel and tolerate peak currents up to 2.5 A per channel for a few seconds. The shield ships fully populated with its SMD components, including the MAX14870 drivers and a FET for reverse battery protection; header pins for interfacing with an Arduino and terminal blocks for connecting motors and power are included but are not soldered in.

Features

  • Two single-channel H-bridge motor drivers with shoot-through protection and internal free-wheeling diodes (can each drive one DC motor)
  • Motor supply voltage: 4.5 V to 36 V
  • Output current: 1.7 A continuous (2.5 A peak) per motor
  • PWM operation up to 50 kHz (ultrasonic frequencies allow for quieter motor operation)
  • Simple two-pin DIR/PWM interface (one pin controls direction and another controls speed)
  • Shield can optionally power the Arduino base directly when motor supply voltage is suitable
  • Shield has convenient location for adding a 3-pin voltage regulator to power the Arduino base in applications where the motor supply voltage is not suitable for powering the Arduino directly
  • Arduino library makes it easy to get started using this board as a motor driver shield
  • Arduino pin mappings can be customized (by cutting traces) if the default mappings are not convenient
  • Reverse-voltage protection on motor power supply
  • Under-voltage lockout
  • Active-low fault output indicates over-current or over-temperature condition
  • Surface-mount resistors can optionally be added to enable automatic current limiting


Mer information
Artikelnr POL-2519
Annan benämning N/A
Infolänkar N/A
Short Description N/A
Skriv din egen recension
Du recenserar:Dual MAX14870 Motor Driver Shield
Fler produkter du kan vara intresserad av