SparkFun Level Shifting microSD BoB

SparkFun Level Shifting microSD BoB

PicoBuck LED Driver

PicoBuck LED Driver

Bus Pirate - v3.6a

299,00 kr 239,20 kr
Slut i lager
SKU
TOL-12942

The Bus Pirate v3.6a, created by Ian Lesnet, is a troubleshooting tool that communicates between a PC and any embedded device over 1-wire, 2-wire, 3-wire, UART, I2C, SPI, and HD44780 LCD protocols - all at voltages from 0-5.5VDC. This product eliminates a ton of early prototyping effort when working with new or unknown chips.

Working with the Bus Pirate is simple and effective - type commands into a terminal on your computer, those commands are interpreted by the Bus Pirate and sent via the proper protocol. The Pirate will also interpret data sent from your embedded device back to your computer terminal. A big bonus is the bootloader installed on the PIC, which allows you to easily update the firmware and change the functionality of the board.

The main components of the Bus Pirate are the PIC24FJ64 processor and a FT232RL USB-to-Serial chip. A Mini-B USB connector that has also been populated on the board, provides the power to the Bus Pirate and allows you to interact with via your PC. The major difference in this version of the Bus Pirate comes from the shrouded 0.1" pitch 2x5 pin header, which has been flipped around to help standardize this board. Additionally every pin on this header has been labeled, eliminating the need for a separate I/O pin description document like with earlier versions.

Features:

Supported protocols:
1-Wire
I2C
SPI
JTAG
Asynchronous serial
MIDI
PC keyboard
HD44780 LCD
2- and 3-wire libraries with bitwise pin control
Scriptable binary bitbang, 1-Wire, I2C, SPI, and UART modes
5.5V tolerant pins
6V measurement probe
1Hz - 40MHz frequency measurement
1kHz - 4MHz pulse-width modulator, frequency generator
On-board multi-voltage pull-up resistors
On-board 3.3volt and 5volt power supplies with software reset
Macros for common operations
Bus traffic sniffers (SPI, I2C)
A bootloader for easy firmware updates
Transparent USB->serial mode
10Hz - 1MHz low-speed logic analyzer
Scriptable from Perl, Python, etc.
Access to PIC24FJ64 ICSP programming port
Mer information
Artikelnr TOL-12942
Annan benämning N/A
Infolänkar N/A
Short Description N/A
Skriv din egen recension
Du recenserar:Bus Pirate - v3.6a