AttoPilot Volt & Current BoB 180A
249,00 kr
199,20 kr
I lager
Fåtal i lager: 1 st
SKU
SEN-10644
- Köp 5 för 242,78 kr 194,22 kr st och spara 3%
- Köp 10 för 236,55 kr 189,24 kr st och spara 5%

This is a small voltage and current sense PCB. DC current is determined by measuring a voltage drop across a pair of parallel shunt resistors, then converted to a final analog voltage output by the TI INA-169. Voltage sense is accomplished by scaling to 3.3V ADC range by a precision resistor divider.
The PCB is supplied without leads or connectors. The pad sizes are large enough to accommodate 12 gauge heavy duty leads (see datasheet) but care must be exercised in soldering. Smaller gauge leads are considerably easier to solder without creating shorts.
Features:
•51.8V Max
•178.8A Max
•Very low zero current offset
•Analog output scaled for 3.3V ADC
•Self Powered
Dimensions: 4 x 15 x 19mm
The PCB is supplied without leads or connectors. The pad sizes are large enough to accommodate 12 gauge heavy duty leads (see datasheet) but care must be exercised in soldering. Smaller gauge leads are considerably easier to solder without creating shorts.
Features:
•51.8V Max
•178.8A Max
•Very low zero current offset
•Analog output scaled for 3.3V ADC
•Self Powered
Dimensions: 4 x 15 x 19mm
Artikelnr | SEN-10644 |
---|---|
Annan benämning | N/A |
Infolänkar | PDF Dabalad Arduinoexempel |
Short Description | N/A |
Skriv din egen recension
Fler produkter du kan vara intresserad av