12V Step Up/Down Voltage Regulator S10V2F12

12V Step Up/Down Voltage Regulator S10V2F12

3.3V Step Up/Down Voltage Regulator S7V8F3

3.3V Step Up/Down Voltage Regulator S7V8F3

12V Step-Up Voltage Regulator U3V12F12

46,00 kr 36,80 kr
Slut i lager
SKU
POL-2117
  • Köp 5 för 43,70 kr 34,96 kr st och spara 5%

The compact (13×8x3mm) U3V12F12 switching step-up (or boost) voltage regulator takes an input voltage as low as 2.5 V and efficiently boosts it to 12 V. The pins have a 0.1? spacing, making this board compatible with standard solderless breadboards and perfboards.

Features
•input voltage: 2.5 V – VOUT
•fixed 5 V, 9 V, or 12 V output with 4% accuracy
•1.4 A switch allows for input currents up to 1.4 A
•2 mA typical no-load quiescent current
•integrated over-temperature shutoff
•small size: 0.515? × 0.32? × 0.1? (13 × 8 × 3 mm)

Connections

The boost regulator has three connections: input voltage (VIN), ground (GND), and output voltage (VOUT).

The input voltage, VIN, must be at least 2.5 V and should not exceed the output voltage, VOUT. Please be wary of destructive LC spikes that might cause the input voltage to exceed VOUT (see below for more information).

The three connections are labeled on the back side of the PCB, and they are arranged with a 0.1? spacing along the edge of the board for compatibility with solderless breadboards, connectors, and other prototyping arrangements that use a 0.1? grid. You can solder wires directly to the board or solder in either the 3×1 straight male header strip or the 3×1 right-angle male header strip that is included.
Mer information
Artikelnr POL-2117
Annan benämning N/A
Infolänkar Tillverkarens Information
Short Description N/A
Skriv din egen recension
Du recenserar:12V Step-Up Voltage Regulator U3V12F12