Köp XMega100 Breakout

Välj språk:

Infosidor

Verktyg

Sök artiklar

Produkter

Nya Produkter
REA - Fyndhörnan
Alla Leverantörer
- Adafruit
- Arduino
- Atmel
- Bolymin
- CMUcam.org
- Code Mercenaries
- DLP Design
- EasySync
- Eikon srl
- Electronic Assembly
- ELMICRO
- Elprotronic
- Evil Mad Science
- FTDI / Vinculum
- GWS
- In-Circuit
- LAWICEL AB
- LeafLabs
- Lextronic
- MaxBotix
- Maxim / Dallas
- MCS Electronics
- Microchip
- NEXA
- Olimex
- Parallax
- PEAK-System Technik
- PoLabs
- Pololu
- Raisonance
- Robot Electronics / Devantech
- Roving Networks
- Seeed Studio
- Sena Technologies
- Sollae Systems
- Sparkfun
- Telldus Technologies
- WIZnet
- Övrigt
Microcontrollers
- ARM
- AVR
- AVR32
- HC08
- HC12 / HCS12
- Linux
- mbed NXP
- MSP430
- .NET Plattform
- PICmicro
- Propeller™
- SX
- x86
Elektronikbyggsatser
Arduino / LilyPads etc.
- Arduino
- Shields
- Starterkit
- LilyPad
- Duinomite
- Pinguino
- Maple
- Tillbehör
Basic Stamp / Propeller
- Displayer
- Moduler
- RFID
- Robotar
- Sensorer
- Starterkit etc.
- Övrigt
SparkFun
- Kit
- Breakout Boards
- Mobilt / Cellular
- Komponenter
- Utvecklingsverktyg
- GPS
- LCDs
- Programmerare
- Prototyping
- Robotics
- Sensorer
- Verktyg / Tools
- Trådlöst / Wireless
- Övrigt
Displayer / Lysdioder
- 7 Segment
- Grafiska
- Intelligenta Grafiska
- Intelligenta Tecken
- LED matriser
- Lysdioder
- Teckenbaserade
Labb / Kablage / Prototyping
- Kablage
- Kopplingsdäck
- Kopplingstråd
- Mekanik
Strömförsörjning
- Batteriladdare
- Spänningsregulatorer
- AC/DC Adapters
- Batterier
- Batterihållare
- Solceller / Solpaneler
Instrument / Verktyg
Kommunikation
- Bluetooth
- CAN
- GSM/3G
- I2C
- TCP/IP
- WiFi
- Nordic 2.4GHz
- Radio 433Mhz
- RS232/422/485
- RFID
- USB
- ZigBee
Programmerare
Robotar & Tillbehör
- Robotar (färdiga)
- Robotar (byggsatser)
- Robotstyrningar
- Motorer
- Motorstyrningar
- Servon
- Servostyrningar
- Sensorer
- Hjul etc.
- Stödkulor etc.
- Mekanik
- Övrigt
Motorer / Servon
- Motorer
- Stegmotorer
- Hobbyservon
- Drivkort
- System
Sensorer / Givare
- Accelerometrar
- Fukt
- Färg
- GPS
- Gyro
- IMU / DOF
- Infraröda
- Kompass
- Reflektion
- RFID
- Rörelse
- Ström/Spänning
- Temperatur
- Tryck
- Ultraljud
- Väder
- Övriga
Multimedia
Komponenter
- Dioder
- Kondensatorer
- Kontaktdon
- Kretsar (IC)
- Lysdioder
- Motstånd
- Omkopplare
- Potentiometrar
- Relän
- Spänningsregulatorer
- Transistorer
- Övrigt
Övrigt

Version:
E-butik Flex (6.3)

Microcontrollers»AVR»Laminat»

SKU: BOB-09546

Lagerstatus: Tillfälligt slut. Kontakta oss för leveranstid

XMega100 Breakout

Beskrivning: This is a breakout board for the 100-pin TQFP package of Atmel's ATxmega128A1. The ATxmega128A1 is a low power, high performance and peripheral rich CMOS 8/16-bit microcontroller based on the AVR enhanced RISC architecture.

Among the chip's many features are 128kB of flash memory, 8 kB SRAM, 78 I/O pins, eight 16-bit timers, sixteen 12-bit ADCs, four 12-bit DACs, eight USART, four SPI and four TWI interfaces. This powerful chip can process up to 32 MIPS when running at its maximum clock speed of 32MHz. The operating voltage of the xmega is 1.6 to 3.6VDC.

All VCC pins of the ATxmega128A1 are connected together and brought out to a single header pin, same goes for the GND and AVCC pins of the chip. We've also included decoupling capacitors, and a red power indicator LED; but beyond those we've tried to keep the board as simple and straightforward as possible. If you want to start developing with this chip, but don't want to deal with soldering it, this is the board for you!

Note: The 6 pins labeled ICSP are used to program the board through the PDI interface using the common 6 pin ICSP cable found on most AVR programmers. Also, this board ships with the example code shown below and the JTAGEN bit set to 1 (JTAG disabled, PDI enabled).