Köp Pololu USB AVR Programmer

Välj språk:

Infosidor

Verktyg

Sök artiklar

Produkter

Nya Produkter
REA - Fyndhörnan
Alla Leverantörer
- Adafruit
- Arduino
- Atmel
- Bolymin
- CMUcam.org
- Code Mercenaries
- DLP Design
- EasySync
- Eikon srl
- Electronic Assembly
- ELMICRO
- Elprotronic
- Evil Mad Science
- FTDI / Vinculum
- GWS
- In-Circuit
- LAWICEL AB
- LeafLabs
- Lextronic
- MaxBotix
- Maxim / Dallas
- MCS Electronics
- Microchip
- NEXA
- Olimex
- Parallax
- PEAK-System Technik
- PoLabs
- Pololu
- Raisonance
- Robot Electronics / Devantech
- Roving Networks
- Seeed Studio
- Sena Technologies
- Sollae Systems
- Sparkfun
- Telldus Technologies
- WIZnet
- Övrigt
Microcontrollers
- ARM
- AVR
- AVR32
- HC08
- HC12 / HCS12
- Linux
- mbed NXP
- MSP430
- .NET Plattform
- PICmicro
- Propeller™
- SX
- x86
Elektronikbyggsatser
Arduino / LilyPads etc.
- Arduino
- Shields
- Starterkit
- LilyPad
- Duinomite
- Pinguino
- Maple
- Tillbehör
Basic Stamp / Propeller
- Displayer
- Moduler
- RFID
- Robotar
- Sensorer
- Starterkit etc.
- Övrigt
SparkFun
- Kit
- Breakout Boards
- Mobilt / Cellular
- Komponenter
- Utvecklingsverktyg
- GPS
- LCDs
- Programmerare
- Prototyping
- Robotics
- Sensorer
- Verktyg / Tools
- Trådlöst / Wireless
- Övrigt
Displayer / Lysdioder
- 7 Segment
- Grafiska
- Intelligenta Grafiska
- Intelligenta Tecken
- LED matriser
- Lysdioder
- Teckenbaserade
Labb / Kablage / Prototyping
- Kablage
- Kopplingsdäck
- Kopplingstråd
- Mekanik
Strömförsörjning
- Batteriladdare
- Spänningsregulatorer
- AC/DC Adapters
- Batterier
- Batterihållare
- Solceller / Solpaneler
Instrument / Verktyg
Kommunikation
- Bluetooth
- CAN
- GSM/3G
- I2C
- TCP/IP
- WiFi
- Nordic 2.4GHz
- Radio 433Mhz
- RS232/422/485
- RFID
- USB
- ZigBee
Programmerare
Robotar & Tillbehör
- Robotar (färdiga)
- Robotar (byggsatser)
- Robotstyrningar
- Motorer
- Motorstyrningar
- Servon
- Servostyrningar
- Sensorer
- Hjul etc.
- Stödkulor etc.
- Mekanik
- Övrigt
Motorer / Servon
- Motorer
- Stegmotorer
- Hobbyservon
- Drivkort
- System
Sensorer / Givare
- Accelerometrar
- Fukt
- Färg
- GPS
- Gyro
- IMU / DOF
- Infraröda
- Kompass
- Reflektion
- RFID
- Rörelse
- Ström/Spänning
- Temperatur
- Tryck
- Ultraljud
- Väder
- Övriga
Multimedia
Komponenter
- Dioder
- Kondensatorer
- Kontaktdon
- Kretsar (IC)
- Lysdioder
- Motstånd
- Omkopplare
- Potentiometrar
- Relän
- Spänningsregulatorer
- Transistorer
- Övrigt
Övrigt

Version:
E-butik Flex (6.3)

Microcontrollers»AVR»Programmerare»

SKU: POL-1300

Lagerstatus: I lager (19st)

Pololu USB AVR Programmer

Beskrivning: This device is a programmer for AVR-based controllers, such as our Orangutan robot controllers and the 3pi robot. The programmer emulates an AVRISP v2 on a virtual serial port, making it compatible with standard AVR programming software. Two additional features help with building and debugging projects: a TTL-level serial port for general-purpose communication and a SLO-scope for monitoring signals and voltage levels. A USB cable and ISP cable are included.

The Pololu USB AVR Programmer is an extremely compact, low-cost in-system programmer (ISP) for Atmel’s AVR mirocontrollers, which makes this device an attractive programming solution for AVR-based controllers like Pololu Orangutan robot controllers. The USB AVR programmer connects to your computer’s USB port via an included USB A to mini-B cable and communicates with your programming software, such as AVR Studio or AVRDUDE, through a virtual COM port using the AVRISPV2/STK500 protocol. The programmer connects to your target device via an included 6-pin ISP programming cable (the older, 10-pin ISP connections are not directly supported, but it’s easy to create or purchase a 6-pin-to-10-pin ISP adapter).

Supported Microcontrollers:
The programmer should work with all AVRs that can be programmed by an AVR ISP, but it has not been tested on all devices (it has been tested with all Orangutan robot controllers and the 3pi Robot). The programmer features upgradable firmware, allowing updates for future devices. It does not currently work with Atmel’s XMega line of microcontrollers.

The programmer is powered by the 5V USB power bus, and it is intended for programming AVRs that are running at close to 5 V (note that the programmer does not deliver power to the target device).

Supported Operating Systems:
The programmer has been tested under Windows XP, Windows Vista, Windows 7, and Linux. It is not compatible with any version of Mac OS or with older versions of Windows. Please see our original Orangutan USB programmer if you need something that can work with the Mac OS (we don’t support Mac operation, but other users have used it successfully) or older versions of Windows.