Köp Mega Pro 3.3V

Välj språk:

Infosidor

Verktyg

Sök artiklar

Produkter

Nya Produkter
REA - Fyndhörnan
Alla Leverantörer
- Adafruit
- Arduino
- Atmel
- Bolymin
- CMUcam.org
- Code Mercenaries
- DLP Design
- EasySync
- Eikon srl
- Electronic Assembly
- ELMICRO
- Elprotronic
- Evil Mad Science
- FTDI / Vinculum
- GWS
- In-Circuit
- LAWICEL AB
- LeafLabs
- Lextronic
- MaxBotix
- Maxim / Dallas
- MCS Electronics
- Microchip
- NEXA
- Olimex
- Parallax
- PEAK-System Technik
- PoLabs
- Pololu
- Raisonance
- Robot Electronics / Devantech
- Roving Networks
- Seeed Studio
- Sena Technologies
- Sollae Systems
- Sparkfun
- Telldus Technologies
- WIZnet
- Övrigt
Microcontrollers
- ARM
- AVR
- AVR32
- HC08
- HC12 / HCS12
- Linux
- mbed NXP
- MSP430
- .NET Plattform
- PICmicro
- Propeller™
- SX
- x86
Elektronikbyggsatser
Arduino / LilyPads etc.
- Arduino
- Shields
- Starterkit
- LilyPad
- Duinomite
- Pinguino
- Maple
- Tillbehör
Basic Stamp / Propeller
- Displayer
- Moduler
- RFID
- Robotar
- Sensorer
- Starterkit etc.
- Övrigt
SparkFun
- Kit
- Breakout Boards
- Mobilt / Cellular
- Komponenter
- Utvecklingsverktyg
- GPS
- LCDs
- Programmerare
- Prototyping
- Robotics
- Sensorer
- Verktyg / Tools
- Trådlöst / Wireless
- Övrigt
Displayer / Lysdioder
- 7 Segment
- Grafiska
- Intelligenta Grafiska
- Intelligenta Tecken
- LED matriser
- Lysdioder
- Teckenbaserade
Labb / Kablage / Prototyping
- Kablage
- Kopplingsdäck
- Kopplingstråd
- Mekanik
Strömförsörjning
- Batteriladdare
- Spänningsregulatorer
- AC/DC Adapters
- Batterier
- Batterihållare
- Solceller / Solpaneler
Instrument / Verktyg
Kommunikation
- Bluetooth
- CAN
- GSM/3G
- I2C
- TCP/IP
- WiFi
- Nordic 2.4GHz
- Radio 433Mhz
- RS232/422/485
- RFID
- USB
- ZigBee
Programmerare
Robotar & Tillbehör
- Robotar (färdiga)
- Robotar (byggsatser)
- Robotstyrningar
- Motorer
- Motorstyrningar
- Servon
- Servostyrningar
- Sensorer
- Hjul etc.
- Stödkulor etc.
- Mekanik
- Övrigt
Motorer / Servon
- Motorer
- Stegmotorer
- Hobbyservon
- Drivkort
- System
Sensorer / Givare
- Accelerometrar
- Fukt
- Färg
- GPS
- Gyro
- IMU / DOF
- Infraröda
- Kompass
- Reflektion
- RFID
- Rörelse
- Ström/Spänning
- Temperatur
- Tryck
- Ultraljud
- Väder
- Övriga
Multimedia
Komponenter
- Dioder
- Kondensatorer
- Kontaktdon
- Kretsar (IC)
- Lysdioder
- Motstånd
- Omkopplare
- Potentiometrar
- Relän
- Spänningsregulatorer
- Transistorer
- Övrigt
Övrigt

Version:
E-butik Flex (6.3)

Arduino / LilyPads etc.»Arduino»

SKU: DEV-10744

Lagerstatus: Fåtal kvar i lager (4st)

Mega Pro 3.3V

Beskrivning: It's powerful, it's portable, it's Pro! We're continuing our Pro series of Arduino-compatible micro-controllers with the addition of the Mega Pro. This is a 3.3V microcontroller running a version of the stk500v2 bootloader at 8MHz. Just like the other Pro-series boards this board is built with all SMD components and comes with no headers populated in order to minimize the cost and the board profile. Of course this board has the same pin-configuration as the Arduino Mega so it is dimensionally shield compatible (but do keep in mind that this is a 3.3V board unlike the Arduino Mega).

The Pro series is meant for users that understand the limitations of system voltage (3.3V), lack of connectors, and USB off board. This board connects directly to the FTDI Basic Breakout board and supports auto-reset and the DC power jack footprint is available, but not populated.

Note: Because modifications were made to the bootloader to support the 3.3V system, you will need to download and install a new board definition so that the Mega Pro can be programmed in the Arduino environment. The .zip archive below contains all of the files that you'll need including a "readme" file with simple instructions for how to install them.