Köp IOIO for Android

Välj språk:

Infosidor

Verktyg

Sök artiklar

Produkter

Nya Produkter
REA - Fyndhörnan
Alla Leverantörer
- Adafruit
- Arduino
- Atmel
- Bolymin
- CMUcam.org
- Code Mercenaries
- DLP Design
- EasySync
- Eikon srl
- Electronic Assembly
- ELMICRO
- Elprotronic
- Evil Mad Science
- FTDI / Vinculum
- GWS
- In-Circuit
- LAWICEL AB
- LeafLabs
- Lextronic
- MaxBotix
- Maxim / Dallas
- MCS Electronics
- Microchip
- NEXA
- Olimex
- Parallax
- PEAK-System Technik
- PoLabs
- Pololu
- Raisonance
- Robot Electronics / Devantech
- Roving Networks
- Seeed Studio
- Sena Technologies
- Sollae Systems
- Sparkfun
- Telldus Technologies
- WIZnet
- Övrigt
Microcontrollers
- ARM
- AVR
- AVR32
- HC08
- HC12 / HCS12
- Linux
- mbed NXP
- MSP430
- .NET Plattform
- PICmicro
- Propeller™
- SX
- x86
Elektronikbyggsatser
Arduino / LilyPads etc.
- Arduino
- Shields
- Starterkit
- LilyPad
- Duinomite
- Pinguino
- Maple
- Tillbehör
Basic Stamp / Propeller
- Displayer
- Moduler
- RFID
- Robotar
- Sensorer
- Starterkit etc.
- Övrigt
SparkFun
- Kit
- Breakout Boards
- Mobilt / Cellular
- Komponenter
- Utvecklingsverktyg
- GPS
- LCDs
- Programmerare
- Prototyping
- Robotics
- Sensorer
- Verktyg / Tools
- Trådlöst / Wireless
- Övrigt
Displayer / Lysdioder
- 7 Segment
- Grafiska
- Intelligenta Grafiska
- Intelligenta Tecken
- LED matriser
- Lysdioder
- Teckenbaserade
Labb / Kablage / Prototyping
- Kablage
- Kopplingsdäck
- Kopplingstråd
- Mekanik
Strömförsörjning
- Batteriladdare
- Spänningsregulatorer
- AC/DC Adapters
- Batterier
- Batterihållare
- Solceller / Solpaneler
Instrument / Verktyg
Kommunikation
- Bluetooth
- CAN
- GSM/3G
- I2C
- TCP/IP
- WiFi
- Nordic 2.4GHz
- Radio 433Mhz
- RS232/422/485
- RFID
- USB
- ZigBee
Programmerare
Robotar & Tillbehör
- Robotar (färdiga)
- Robotar (byggsatser)
- Robotstyrningar
- Motorer
- Motorstyrningar
- Servon
- Servostyrningar
- Sensorer
- Hjul etc.
- Stödkulor etc.
- Mekanik
- Övrigt
Motorer / Servon
- Motorer
- Stegmotorer
- Hobbyservon
- Drivkort
- System
Sensorer / Givare
- Accelerometrar
- Fukt
- Färg
- GPS
- Gyro
- IMU / DOF
- Infraröda
- Kompass
- Reflektion
- RFID
- Rörelse
- Ström/Spänning
- Temperatur
- Tryck
- Ultraljud
- Väder
- Övriga
Multimedia
Komponenter
- Dioder
- Kondensatorer
- Kontaktdon
- Kretsar (IC)
- Lysdioder
- Motstånd
- Omkopplare
- Potentiometrar
- Relän
- Spänningsregulatorer
- Transistorer
- Övrigt
Övrigt

Version:
E-butik Flex (6.3)

Microcontrollers»PICmicro»

SKU: DEV-10748

Lagerstatus: Fåtal kvar i lager (4st)

IOIO for Android

Beskrivning: The IOIO (pronounced "yo-yo") is a board specially designed to work with your Android device (OS versions 1.5 and greater). The board provides extensive and robust connectivity to an Android device via a USB connection. The IOIO is fully controllable from within an Android application, using a simple and intuitive Java API - no embedded programming or external programmer will ever be needed, even for firmware upgrades!

So far, the devices proven to work are: G1, Nexus One, Nexus S, Motorola Droid X. If you get the IOIO working on your Android device, please let us know in the comments below, thanks!

The IOIO board contains a single MCU that acts as a USB host and interprets commands from an Android app. In addition, the IOIO can interact with peripheral devices in the same way as most MCUs. Digital Input/Output, PWM, Analog Input, I2C, SPI, and UART control can all be used with the IOIO. Code to control these interfaces is written in the same way as you write an Android app with the help of a simple to use app-level library. In other words, you can combine the awesome computing power, Internet/Bluetooth connectivity, touch screen, and a variety of sensors from your Android device with the ability to easily add peripheral devices to interact with the outside world.

The board needs to be powered through the VIN pin with a 5V-15V power supply. There is also an optional, unpopulated JST connector footprint on the bottom of the board that can be used, however single cell LiPos will NOT work with this connector, you need a 5-15V input. More info here. The IOIO can also provide 1.5A at 5V for charging your Android device or powering small servos, etc.. A potentiometer on the board allows limiting the amount of current the Android device pulls for detection and charging. It needs to be adjusted once for a specific hardware model or be set so that full charging current is supplied. Be sure to enable USB debugging on your Android device to allow communication with the IOIO. More information on how to do all of this can be found in the Beginners Guide.

Exkl moms: 339,00 sek

Mängdrabatt, klicka här!

Klicka på bilden för att förstora

Tillverkarens Info

Nybörjarguiden

Exempelkod

Relaterade produkter

SKU: PS05-10A

AC/DC Adapter 5VDC, 1A

Beskrivning: Nätadapter, 100-240VAC 50/60Hz till 5VDC, 1A, 1.5m kabel, svart.

Kompakt nätadapter med minimal standby-förbrukning och LED som visar om ström ...

Lagerstatus: Fåtal kvar i lager (8st)

Exkl moms: 59,00 sek Mängdrabatt

SKU: TOL-08734

Barrel Jack to 2-pin JST

Beskrivning: Two pin JST connector to a 2.1x 5.5mm barrel jack, 6.25 inch long jumper cable. We use this cable to adapt from a wall power supply to a relatively ...

Lagerstatus: I lager (13st)

Exkl moms: 21,00 sek

SKU: DEV-10745

Electric Sheep

Beskrivning: Do Androids dream of Electric Sheep? Well if not, they should. The Electric Sheep board is a development tool (similar to the Arduino Mega ADK) for ...

Lagerstatus: Fåtal kvar i lager (4st)

Exkl moms: 529,00 sek Mängdrabatt