Välj språk:
Infosidor
Verktyg
Sök artiklar
Produkter
Version:
E-butik Flex (6.3)
Alla Leverantörer»Adafruit»
SKU: ADA-0322
Lagerstatus: Fåtal kvar i lager (4st)
12mm Diffused Digital RGB LED
Beskrivning: RGB Pixels are digitally-controllable lights you can set to any color, or animate. Each RGB LED and controller chip is molded into a 'dot' of silicone. The dots are waterproof and rugged. There are four flanges molded in so that you can 'push' them into a 12mm drill hole in any material up to 1.5mm/0.06" thick. They're typically used to make outdoor signs. Compared to our other 20mm LED dots, these are diffused 8mm LEDs so they are not as bright but they color mix a little nicer.

The pixels are connected by a 4-conductor cable. +5V, ground, data and clock. Data is shifted down from one pixel to the next so that you can easily cut the strand or attach more onto the end.

Each dot is digitally controlled, with an internal 8-bit PWM LED driver (24-bit color for 16 million different shades). The pixels must be clocked by a microcontroller, we have an example code linked below that works on an Arduino, it should be simple to adapt it to any other microcontroller.

The pixels use 8mm diffused RGB LEDs, with a 120 degree beam width. The total max brightness of all LEDs is about 1600mcd but with the light more evenly distributed & mixed than a clear LED. (Please note: mcd ratings of LEDs are notoriously inflated by most LED sellers, so be extra-skeptical when reviewing LED ratings!)

Sold by the strand, each strand has 25 pixels in series! Each strand has two JST SM 4-pin connectors so you can connect multiple strands in a row, as many as you wish, just watch for how much current they want. We have a 5V/2A supply that should be able to drive 2 or more strands and a 5V/10A supply that can drive up to 160 LEDs all lit up at once

If you want to connect to the input of a strand (to wire it to power and a microcontroller) please get a receptacle connector. If you want to connect to the output, get a plug cable.

You can drive these with an Arduino using any two microcontroller digital pins, check this library which also has example code to demonstrate the strands and be sure to read our very detailed tutorial on usage!

Technical Data:
•12mm diameter (0.45") 75mm deep (1.5")
•88mm / 3.5" apart on the strand
•25 pieces per strand
•New! These pixels use a WS2801 chip for full 24 bit color
•5V power, 60mA maximum per pixel (LED on full white)
•2-pin SPI-like protocol
•WS2801 for the chip inside each pixel
•Brightness: Red = 3.3 Lumens/300 mcd, Green = 10 Lumens/1000 mcd, Blue = 2.7 Lumens/300 mcd (mcd calculation based on full 120 degree beam)
Exkl moms: 309,00 sek
Mängdrabatt, klicka här!
Klicka på bilden för att förstora
Relaterade produkter
SKU: COM-11020
RGB LED Chain - 20 LED Addr.
Beskrivning: Let there be light(s)! This festive string of addressable RGB LEDs can add color to indoor or outdoor displays. Much like our addressable LED strips, ...
Lagerstatus: Fåtal kvar i lager (3st)
Exkl moms: 239,00 sek Mängdrabatt
SKU: COM-10312
RGB LED Strip - 32 LED Addr.
Beskrivning: This RGB LED strip allows you to individually control all 32 RGB LEDs on a waterproof, self-adhesive strip. Each LED has its own WS2801 IC and ...
Lagerstatus: Fåtal kvar i lager (3st)
Exkl moms: 299,00 sek Mängdrabatt
SKU: BOB-10504
WS2801 Breakout
Beskrivning: This is a breakout board for the WS2801 RGB LED controller, the same IC used in our addressable RGB LED strips. The board comes with the chip on one ...
Lagerstatus: I lager (25-49st)
Exkl moms: 34,00 sek Mängdrabatt
Stäng
Kundvagnen är tom
Logga in
Logga in
Lösenord
Ny kund
Glömt lösenord?
Följ oss på: Facebook  Google+ Twitter Blog 

Fraktfritt inom Sverige om ni beställer för minst 995:- exkl. moms (1244:- inkl. moms).

Beställningar före 14.00 skickas samma dag från oss (dock inte fredagar, då är det sista tid 10.30)

OBS: Vi håller stängt den 6/6: Sveriges Nationaldag
Arduino @ LAWICEL Nya Ardunio Uno och Arduino Mega2560 samt en massa tillbehör till Arduino.
Välj valuta
Pris exkl/inkl moms
SparkFun @ LAWICEL Sensorer, Breakout Boards, Trådlöst, Arduino etc.
Vi är ett kreditvärdigt företag enligt Soliditets värderingssystem som baserar sig på en mängd olika beslutsregler. Denna uppgift är alltid aktuell, informationen uppdateras dagligen via Soliditets databas.
Kontakta oss Har du frågor, saknar någon artikel eller funderingar är du mer än välkommen att höra av dig till oss! Kontakta oss
Produktförteckning
Info om cookies
LAWICEL AB, Box 3, 282 21 Tyringe, 556684-9203, Telefon 0451-59877, Besöksadress: Industrigatan 6